All engine oil pans transmission oil pan oil sump are developed specified designs, with oil capacity and baffles as required by the application. The parts are manufactured with heavy gauge materials and originally painted parts are powdercoated, providing a durable and long lasting. Each oil pan includes a drain plug.

• Heavy gauge materials provide superior oil pan durability and resistance to warping

• High-Temp powder coating resists corrosion and ensures a long lasting replacement for oil pan oil sump 

• Oil pan sump baffles provide required oil control and prevents engine starvation

Our company use the raw material from BaoSteel with raw material certificate for every batch of incoming coil .
Apply to braze copper welding by welding robot, All oil pan assemblies then receive excellent surfacetreatment to meet corrosion resistance requirement.
Each oil pan went though by leaking test before delivery 

Thanks to our customer the reason why we were standing here today

We focus on the stamping forming bending welding part for almost 30 years.
Founded in 1992, Started exporting in 2008, which is now covered more than 10000 square meters and with 439 employee.
 

We start with the oil pan simulation

mold drawing building

We fully carry out the TS 16949 quanlity management system with manufactory.Start from raw material incoming inspection to container loading .

Continuous improvemnet:ACT-PLAN-DO -CHECK 

Raw material incoming inspection :

Raw material incoming inspection :
1.Five element analyzer
Automatic five element analyzer carbon sulfur manganese silicon phosphorus chemical element spectrum analyzer
Any type of the element out of specification will Affecting mechanical properties

Raw material incoming inspection :
2.Mechanical Properties
Only tensile strength, yield strength and elongation of raw materials meet the requirements can move into mass productions.

Decoiler
We bought the raw material by coil from the steel company ,we decoiler the steel sheet by ourslef ,which will save the cost and lead time for mass productions.

Laser cutting for the steel sheet 

When produce the sample or the small batch of the product we normally use the laser cutting insted of the stamping blanking.

Blaze welding copper for the tube
oil pickup tube 
Engine auto coolant pipe

3D laser cutting instad of stamping mold by the sample production for oil pan oil sump 

CNC machining center
We introduce 5pcs of CNC machine ,all of them with 5 Axis not only they can produce the mold and tooling but also they can carry out some part of machine job.

The capacity of the CNC machine was :25000*1800*1000mm

Stamping Workshop
Overview of the Stamping workshop with cover the
Stamping equipment   from 100T to 800T.
Hydraulic Press cover from 50T to 3100T.
With the mold(die,tooling) produce by ourselves we can customize all kinds of metal shape according to customer drawing call out.

 Metal sheet bending by machine without mold or tooling help by press or stamping machine

Bending Workshop
CNC bending machine with servo control precise control the tolerance according to customer requirement.
The capacity of bending diameter reach to Φ135mm.

Welding Workshop

Welding robot with Synchronous workstation introduce from Panasonic Japan ,we had 23pcs welding arm with 64 pcs working stations,sheild welding support by Continuous gas supply station.

Brazing Welding For Pipe
Pipe with brazing welding can get perfect out appearance also reduce leaking on welding area.

Spot Welding (Resistance welding)
The ABB resistance welding robot can improve the welding joint strength also Improve spot welding efficiency.Reduce defects of traditional spot welding.

Surface Treatment
The coating line improves the efficiency, reduces the pollution to the environment, and the wastewater discharge after industrial treatment reaches the national standard.

Salt and spry test 
Each batch of the surface treatment should go though the test before packing and shipment

Inspection tooling calibration by CMM
The inspecion calibration was a key job to ensure the quality of working piece.

Dimension Inspection 

The mold and inspect gauge also the PPAP part was inspect by the CMM and Handy scanning equipment.

ERP System In Our Company
All data support by ERP System, Cover From Raw Material Incoming To Shipment.

Leaking test 
Simulation the oil pan oil sump install on the engine
To check if the leaking

Company Team
Team Working Together For Bright Future

ENJOY THE WORK, ENJOY THE LIFE.